Otherwise attachments have a high chance to disappear with akkoma-fe’s
“delete & redraft” feature when cleanup is enabled in the backend. Since
we don't know whether a deletion was intended to be part of a redraft
process or even if whether the redraft was abandoned we still have to
delete attachments eventually.
A thirty minute delay should provide sufficient time for redrafting.
Fixes: https://akkoma.dev/AkkomaGang/akkoma/issues/775
Current logic unconditionally adds public adressing to "cc"
and follower adressing to "to" after attempting to strip it
from the other one. This creates serious problems:
First the bug prompting this investigation and fix,
unconditional addition creates duplicates when adressing
URIs already were in their intended final field; e.g.
this is prominently the case for all "unlisted" posts.
Since List.delete only removes the first occurence,
this then broke follower-adress stripping later on
making the policy ineffective.
It’s also just not safe in general wrt to non-public adressing:
e.g. pre-existing duplicates didn’t get fully stripped,
bespoke adressing modes with only one of public addressing
or follower addressing are mangled — and most importantly:
any belatedly received DM or follower-only post
also got public adressing added!
Shockingly this last point was actually asserted as "correct" in tests;
it appears to be a mistake from mindless match adjustments
while fixing crashes on nil adressing in
10c792110e.
Clean up this sloppy logic up, making sure no more duplicates are
added by us, all instances of relevant adresses are purged and only
readded when they actually existed to begin with.
Current AP spec demands anonymous objects to have an id value,
but explicitly set it to JSON null. Howeveras it turns out this is
incompatible with JSON-LD requiring `@id` to be a string and thus AP
spec is incompatible iwth the Ativity Streams spec it is based on.
This is an issue for (the few) AP implementers actually performing
JSON-LD processing, like IceShrimp.NET.
This was uncovered by IceShrimp.NET’s zotan due to our adoption of
anonymous objects for emoj in f101886709.
The issues is being discussed by W3C, and will most likely be resolved
via an errata redefining anonymous objects to completely omit the id
field just like transient objects already do. See:
https://github.com/w3c/activitypub/issues/476
Fixes: https://akkoma.dev/AkkomaGang/akkoma/issues/848
Since we now remember the final location redirects lead to
and use it for all further checks since
3e134b07fa, these redirects
can no longer be exploited to serve counterfeit objects.
This fixes:
- display URLs from independent webapp clients
redirecting to the canonical domain
- Peertube display URLs for remote content
(acting like the above)
As hinted at in the commit message when strict checking
was added in 8684964c5d,
refetching is more robust than display URL comparison
but in exchange is harder to implement correctly.
A similar refetch approach is also employed by
e.g. Mastodon, IceShrimp and FireFish.
To make sure no checks can be bypassed by forcing
a refetch, id checking is placed at the very end.
This will fix:
- Peertube display URL arrays our transmogrifier fails to normalise
- non-canonical display URLs from alternative frontends
(theoretical; we didnt’t get any actual reports about this)
It will also be helpful in the planned key handling overhaul.
The modified user collision test was introduced in
https://git.pleroma.social/pleroma/pleroma/-/merge_requests/461
and unfortunately the issues this fixes aren’t public.
Afaict it was just meant to guard against someone serving
faked data belonging to an unrelated domain. Since we now
refetch and the id actually is mocked, lookup now succeeds
but will use the real data from the authorative server
making it unproblematic. Instead modify the fake data further
and make sure we don’t end up using the spoofed version.
Ever since the browser frontend switcher was introduced in
de64c6c54a /akkoma counts as
an API prefix and thus gets skipped by frontend plugs
breaking the old swagger ui path of /akkoma/swagger-ui.
Do the simple thing and change the frontend path to
/pleroma/swaggerui which isn't an API path and can't collide
with frontend user paths given pleroma is areserved nickname.
Reported in
https://meta.akkoma.dev/t/view-all-endpoints/269/7https://meta.akkoma.dev/t/swagger-ui-not-loading/728
Multiple profiles can be specified as a space-separated list
and the possibility of additional profiles is explicitly brought up
in ActivityStream spec
Not _yet_ supported as of exiftool 12.87, though
at first glance it seems like standard BMP files
can't store any metadata besides colour profiles
Fixes the specific case from
https://akkoma.dev/AkkomaGang/akkoma-fe/issues/396
although the frontend shouldn’t get bricked regardless.
Fragments are already always stripped anyway
so listing one specific fragment here is
unnecessary and potentially confusing.
This effectively reverts
4457928e32
but keeps the added bridgy testcase.
Usually an id should point to another AP object
and the image file isn’t an AP object. We currently
do not provide standalone AP objects for emoji and
don't keep track of remote emoji at all.
Thus just federate them as anonymous objects,
i.e. objects only existing within a parent context
and using an explicit null id.
IceShrimp.NET previously adopted anonymous objects
for remote emoji without any apparent issues. See:
333611f65e
Fixes: https://akkoma.dev/AkkomaGang/akkoma/issues/694
We’ve received reports of some specific instances slowly accumulating
more and more binary data over time up to OOMs and globally setting
ERL_FULLSWEEP_AFTER=0 has proven to be an effective countermeasure.
However, this incurs increased cpu perf costs everywhere and is
thus not suitable to apply out of the box.
Apparently long-lived Phoenix websocket processes are known to
often cause exactly this by getting into a state unfavourable
for the garbage collector.
Therefore it seems likely affected instances are using timeline
streaming and do so in just the right way to trigger this. We
can tune the garbage collector just for websocket processes
and use a more lenient value of 20 to keep the added perf cost
in check.
Testing on one affected instance appears to confirm this theory
Ref.:
https://www.erlang.org/doc/man/erlang#ghlink-process_flag-2-idp226https://blog.guzman.codes/using-phoenix-channels-high-memory-usage-save-money-with-erlfullsweepafterhttps://git.pleroma.social/pleroma/pleroma/-/merge_requests/4060
Tested-by: bjo
Ever since 364b6969eb
this setting wasn't used by the backend and a noop.
The stated usecase is better served by setting the base_url
to a local subdomain and using proxying in nginx/Caddy/...
Websites are increasingly getting more bloated with tricks like inlining content (e.g., CNN.com) which puts pages at or above 5MB. This value may still be too low.
Rich Media parsing was previously handled on-demand with a 2 second HTTP request timeout and retained only in Cachex. Every time a Pleroma instance is restarted it will have to request and parse the data for each status with a URL detected. When fetching a batch of statuses they were processed in parallel to attempt to keep the maximum latency at 2 seconds, but often resulted in a timeline appearing to hang during loading due to a URL that could not be successfully reached. URLs which had images links that expire (Amazon AWS) were parsed and inserted with a TTL to ensure the image link would not break.
Rich Media data is now cached in the database and fetched asynchronously. Cachex is used as a read-through cache. When the data becomes available we stream an update to the clients. If the result is returned quickly the experience is almost seamless. Activities were already processed for their Rich Media data during ingestion to warm the cache, so users should not normally encounter the asynchronous loading of the Rich Media data.
Implementation notes:
- The async worker is a Task with a globally unique process name to prevent duplicate processing of the same URL
- The Task will attempt to fetch the data 3 times with increasing sleep time between attempts
- The HTTP request obeys the default HTTP request timeout value instead of 2 seconds
- URLs that cannot be successfully parsed due to an unexpected error receives a negative cache entry for 15 minutes
- URLs that fail with an expected error will receive a negative cache with no TTL
- Activities that have no detected URLs insert a nil value in the Cachex :scrubber_cache so we do not repeat parsing the object content with Floki every time the activity is rendered
- Expiring image URLs are handled with an Oban job
- There is no automatic cleanup of the Rich Media data in the database, but it is safe to delete at any time
- The post draft/preview feature makes the URL processing synchronous so the rendered post preview will have an accurate rendering
Overall performance of timelines and creating new posts which contain URLs is greatly improved.
This lets us:
- avoid issues with broken hash indices for PostgreSQL <10
- drop runtime checks and legacy codepaths for <11 in db search
- always enable custom query plans for performance optimisation
PostgreSQL 11 is already EOL since 2023-11-09, so
in theory everyone should already have moved on to 12 anyway.
Using only the admin key works as well currently
and Akkoma needs to know the admin key to be able
to add new entries etc. However the Meilisearch
key descriptions suggest the admin key is not
supposed to be used for searches, so let’s not.
For compatibility with existings configs, search_key remains optional.
Meilisearch is already configured to return results sorted by a
particular ranking configured in the meilisearch CLI task.
Resorting the returned top results by date partially negates this and
runs counter to what someone with tweaked settings expects.
Issue and fix identified by AdamK2003 in
https://akkoma.dev/AkkomaGang/akkoma/pulls/579
But instead of using a O(n^2) resorting, this commit directly
retrieves results in the correct order from the database.
Closes: https://akkoma.dev/AkkomaGang/akkoma/pulls/579
Trying to display non-media as media crashed the renderer,
but when posting a status with a valid, non-media object id
the post was still created, but then crashed e.g. timeline rendering.
It also crashed C2S inbox reads, so this could not be used to leak
private posts.
Afaict this was never used, but keeping this (in theory) possible
hinders detecting which objects are actually media uploads and
which proper ActivityPub objects.
It was originally added as part of upload support itself in
02d3dc6869 without being used
and `git log -S:activity_type` and `git log -Sactivity_type:`
don't find any other commits using this.
In Mastodon media can only be used by owners and only be associated with
a single post. We currently allow media to be associated with several
posts and until now did not limit their usage in posts to media owners.
However, media update and GET lookup was already limited to owners.
(In accordance with allowing media reuse, we also still allow GET
lookups of media already used in a post unlike Mastodon)
Allowing reuse isn’t problematic per se, but allowing use by non-owners
can be problematic if media ids of private-scoped posts can be guessed
since creating a new post with this media id will reveal the uploaded
file content and alt text.
Given media ids are currently just part of a sequentieal series shared
with some other objects, guessing media ids is with some persistence
indeed feasible.
E.g. sampline some public media ids from a real-world
instance with 112 total and 61 monthly-active users:
17.465.096 at t0
17.472.673 at t1 = t0 + 4h
17.473.248 at t2 = t1 + 20min
This gives about 30 new ids per minute of which most won't be
local media but remote and local posts, poll answers etc.
Assuming the default ratelimit of 15 post actions per 10s, scraping all
media for the 4h interval takes about 84 minutes and scraping the 20min
range mere 6.3 minutes. (Until the preceding commit, post updates were
not rate limited at all, allowing even faster scraping.)
If an attacker can infer (e.g. via reply to a follower-only post not
accessbile to the attacker) some sensitive information was uploaded
during a specific time interval and has some pointers regarding the
nature of the information, identifying the specific upload out of all
scraped media for this timerange is not impossible.
Thus restrict media usage to owners.
Checking ownership just in ActivitDraft would already be sufficient,
since when a scheduled status actually gets posted it goes through
ActivityDraft again, but would erroneously return a success status
when scheduling an illegal post.
Independently discovered and fixed by mint in Pleroma
1afde067b1
In MastoAPI media descriptions are updated via the
media update API not upon post creation or post update.
This functionality was originally added about 6 years ago in
ba93396649 which was part of
https://git.pleroma.social/pleroma/pleroma/-/merge_requests/626 and
https://git.pleroma.social/pleroma/pleroma-fe/-/merge_requests/450.
They introduced image descriptions to the front- and backend,
but predate adoption of Mastodon API.
For a while adding an `descriptions` array on post creation might have
continued to work as an undocumented Pleroma extension to Masto API, but
at latest when OpenAPI specs were added for those endpoints four years
ago in 7803a85d2c, these codepaths ceased
to be used. The API specs don’t list a `descriptions` parameter and
any unknown parameters are stripped out.
The attachments_from_ids function is only called from
ScheduledActivity and ActivityDraft.create with the latter
only being called by CommonAPI.{post,update} whihc in turn
are only called from ScheduledActivity again, MastoAPI controller
and without any attachment or description parameter WelcomeMessage.
Therefore no codepath can contain a descriptions parameter.
