Logger output being visible depends on user configuration, but most of
the prints in mix tasks should always be shown. When running inside a
mix shell, it’s probably preferable to send output directly to it rather
than using raw IO.puts and we already have shell_* functions for this,
let’s use them everywhere.
Pruning can go on for a long time; give admins some insight into that
something is happening to make it less frustrating and to make it easier
which part of the process is stalled should this happen.
Again most of the changes are merely reindents;
review with whitespace changes hidden recommended.
May sometimes be helpful to get more predictable runtime
than just with an age-based limit.
The subquery for the non-keep-threads path is required
since delte_all does not directly accept limit().
Again most of the diff is just adjusting indentation, best
hide whitespace-only changes with git diff -w or similar.
This gives feedback when to stop rerunning limited batches.
Most of the diff is just adjusting indentation; best reviewed
with whitespace-only changes hidden, e.g. `git diff -w`.
This part of pruning can be very expensive and bog down the whole
instance to an unusable sate for a long time. It can thus be desireable
to split it from prune_objects and run it on its own in smaller limited batches.
If the batches are smaller enough and spaced out a bit, it may even be possible
to avoid any downtime. If not, the limit can still help to at least make the
downtime duration somewhat more predictable.
This makes show-key’s output match our documentation as of Meilisearch
1.8.0-8-g4d5971f343c00d45c11ef0cfb6f61e83a8508208. Since I’m not sure
if older versions maybe only provided description, it will fallback to
the latter if no name parameter exists.
Documentation was already clear on this only stripping GPS tags.
But there are more potentially sensitive metadata tags (e.g. author
and possibly description) and the name alone suggests a broader effect.
Thus change the filter to strip all metadata except for colourspace info
and orientation (technically it strips everything and then readds
selected tags).
Explicitly stripping CommonIFD0 is needed since -all does not modify
IFD0 due to TIFF storing some actual image data there. CommonIFD0 then
strips a bunch of commonly used actual metadata tags from IFD0, to my
understanding leaving TIFF image data and custom metadata tags intact.
This actually was already intended before to eradict all future
path-traversal-style exploits and to fix issues with some
characters like akkoma#610 in 0b2ec0ccee. However, Dedupe and
AnonymizeFilename got mixed up. The latter only anonymises the name
in Content-Disposition headers GET parameters (with link_name),
_not_ the upload path.
Even without Dedupe, the upload path is prefixed by an UUID,
so it _should_ already be hard to guess for attackers. But now
we actually can be sure no path shenanigangs occur, uploads
reliably work and save some disk space.
While this makes the final path predictable, this prediction is
not exploitable. Insertion of a back-reference to the upload
itself requires pulling off a successfull preimage attack against
SHA-256, which is deemed infeasible for the foreseeable futures.
Dedupe was already included in the default list in config.exs
since 28cfb2c37a, but this will get overridde by whatever the
config generated by the "pleroma.instance gen" task chose.
Upload+delete tests running in parallel using Dedupe might be flaky, but
this was already true before and needs its own commit to fix eventually.
Currently, Akkoma sorts by published date first before everything else.
This however makes search results pretty bad since Meilisearch uses a
bucket sort algorithm in order of the ranking rules specified:
https://www.meilisearch.com/docs/learn/core_concepts/relevancy#behavior
Since the `published` attribute is a unix timestamp, the resulting
buckets are pretty small so the other rules essentially have little to
no effect on the rankings of search results.
This fixes that issue by moving the `published:desc` rule further down
so it still sorts by date, but only after considering everything else.
AFAIK attribute and sort doesn't really affect results for Akkoma since
the only attribute considered is the `content` attribute and the `sort`
parameter isn't used in Akkoma searches. Everything else is made to
match more closely to Meilisearch's defaults.
OTP builds to 1.15
Changelog entry
Ensure policies are fully loaded
Fix :warn
use main branch for linkify
Fix warn in tests
Migrations for phoenix 1.17
Revert "Migrations for phoenix 1.17"
This reverts commit 6a3b2f15b74ea5e33150529385215b7a531f3999.
Oban upgrade
Add default empty whitelist
mix format
limit test to amd64
OTP 26 tests for 1.15
use OTP_VERSION tag
baka
just 1.15
Massive deps update
Update locale, deps
Mix format
shell????
multiline???
?
max cases 1
use assert_recieve
don't put_env in async tests
don't async conn/fs tests
mix format
FIx some uploader issues
Fix tests
When doing prune_objects, it's possible that bookmarked objects are deleted.
This gave problems when fetching the bookmark TL.
Here we clean up the bookmarks during pruning in the case were it's possible that bookmarked objects are deleted.
E.g. Flag activities have an array of objects
We prune the activity when NONE of the objects can be found
Note that the cost of finding and deleting these is ~4x higher than finding and deleting the non-array ones
Only string:
Delete on activities (cost=506573.48..506580.38 rows=0 width=0)
Only Array:
Delete on activities (cost=3570359.68..4276365.34 rows=0 width=0)
(They are still executed separately, so the total cost is the sum of the two)
We add an option to also prune remote activities who don't have existing objects any more they reference.
Rn, we only check for activities who only reference one object, not an array or embeded object.
This adds an option to the prune_objects mix task.
The original way deleted all non-local public posts older than a certain time frame.
Here we add a different query which you can call using the option --keep-threads.
We query from the activities table all context id's where
1. the newest activity with this context is still old
2. none of the activities with this context is is local
3. none of the activities with this context is bookmarked
and delete all objects with these contexts.
The idea is that posts with local activities (posts, replies, likes, repeats...) may be interesting to keep.
Besides that, a post lives in a certain context (the thread), so we keep the whole thread as well.
Caveats:
* ~~Quotes have a different context. Therefore, when someone quotes a post, it's possible the quoted post will still be deleted.~~ fixed in https://akkoma.dev/AkkomaGang/akkoma/pulls/379
* Although undocumented (in docs/docs/administration/CLI_tasks/database.md/#prune-old-remote-posts-from-the-database), the 'normal' delete action still kept old remote non-public posts. I added an option to keep this behaviour, but this also means that you now have to explicitly provide that option. **This could be considered a breaking change!**
* ~~Note that this removes from the objects table, but not from the activities.~~ See https://akkoma.dev/AkkomaGang/akkoma/pulls/427 for that.
Some statistics from explain analyse:
(cost=1402845.92..1933782.00 rows=3810907 width=62) (actual time=2562455.486..2562455.495 rows=0 loops=1)
Planning Time: 505.327 ms
Trigger for constraint chat_message_references_object_id_fkey: time=651939.797 calls=921740
Trigger for constraint deliveries_object_id_fkey: time=52036.009 calls=921740
Trigger for constraint hashtags_objects_object_id_fkey: time=20665.778 calls=921740
Execution Time: 3287933.902 ms
***
**TODO**
1. [x] **Question:** Is it OK to keep it like this in regard to quote posts? If not (ie post quoted by local users should also be kept), should we give quotes the same context as the post they are quoting? (If we don't want to give them the same context, I'll have to see how/if I can do it without being too costly)
* See https://akkoma.dev/AkkomaGang/akkoma/pulls/379
2. [x] **Question:** the "original" query only deletes public posts (this is undocumented, but you can check the code). This new one doesn't care for scope. From the docs I get that the idea is that posts can be refetched when needed. But I have from a trusted source that Pleroma can't refetch non-public posts. I assume that's the reason why they are kept here. I see different options to deal with this
1. ~~We keep it as currently implemented and just don't care about scope with this option~~
2. ~~We add logic to not delete non-public posts either (I'll have to see how costly that becomes)~~
3. We add an extra --keep-non-public parameter. This is technically speaking breakage (you didn't have to provide a param before for this, now you do), but I'm inclined to not care much because it wasn't documented nor tested in the first place.
3. [x] See if we can do the query using Elixir
4. [x] Test on a bigger DB to see that we don't run into a timeout
5. [x] Add docs
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: https://akkoma.dev/AkkomaGang/akkoma/pulls/350
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
During attachment upload Pleroma returns a "description" field.
* This MR allows Pleroma to read the EXIF data during upload and return the description to the FE using this field.
* If a description is already present (e.g. because a previous module added it), it will use that
* Otherwise it will read from the EXIF data. First it will check -ImageDescription, if that's empty, it will check -iptc:Caption-Abstract
* If no description is found, it will simply return nil, which is the default value
* When people set up a new instance, they will be asked if they want to read metadata and this module will be activated if so
There was an Exiftool module, which has now been renamed to Exiftool.StripLocation
